396 Project

Here's some pictures of my 396 parts and the oops, basically a 396 with Eagle H beam rods and L19 rod bolts = water jacket issues.
The repair is going to be 2 stage epoxy to fill the holes then about 1" of hard block filler from Moroso.
Beware if you do this combo don't choose Eagle H beam rods and L19 bolts with a 396....
Parts
Scat forged lightweight 3.875 crank
Eagle 5.85 H beam forged rods
4.030 SRP/JE Nitrous pistons with Hellfire rings
Canton 242T oil pan
Custom grind nitrous cam 234/240@050 with 576/596 lift with 1.6 RR and 114 LSA
Ported Fbody aluminum LT1 head castings